TB6612FNG Dual Motor Driver Module 1A
SKU: 1477- Description
- Reviews (0)
Description
Description:
The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes – CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.
Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).
Board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1″ pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.
Features:
Power supply voltage: VM=15V max, VCC=2.7-5.5V
Output current: Iout=1.2A(average) / 3.2A (peak)
Standby control to save power
CW/CCW/short brake/stop motor control modes
Built-in thermal shutdown circuit and low voltage detecting circuit
All pins of the TB6612FNG broken out to 0.1″ spaced pins
Filtering capacitors on both supply lines
Be the first to review “TB6612FNG Dual Motor Driver Module 1A”
Most Viewed Products
-
Door Security Alarm System Infrared Motion Detector Wireless PIR Sensor Alarm with Remote Control
-
Spot Welding Pen with Automatic Trigger for Weld Mini Spot Welder
-
DC 6-60V 20A DC Motor Speed Controller Regulator Digital Display 0~100% adjustable Forward Backward
-
PZEM-021 220V 20A 4in1 Voltage Current Power KWH Digital Panel AC Power Meter Electric Energy Meter
Reviews
There are no reviews yet.