DRV8833 2 Channel DC Motor Driver Module Board 1.5A 3V-10V
SKU: 1672- Description
- Reviews (0)
Description
Product Description
DRV8833 is a dual H-bridge motor driver IC that can be used for bidirectional control of two brushed DC motors at 2.7 V to 10.8 V. It can supply up to about 1.2 A per channel continuously and can tolerate peak currents up to 2 A per channel for a few seconds, making it an ideal driver for small motors that run on relatively low voltages. The board ships populated with SMD components, including the DRV8833, and adds an FET for reverse battery protection.
The DRV8833 has a higher peak current rating (2 A per channel vs 1.5 A), optional built-in current-limiting, and no need for externally supplied logic voltage.
FEATURES:
Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor
Operating voltage: 2.7 V to 10.8 V
Output current: 1.2 A continuous (2 A peak) per motor
Motor outputs can be paralleled to deliver 2.4 A continuous (4 A peak) to a single motor
Inputs are 3V- and 5V-compatible
Under-voltage lockout and protection against over-current and over-temperature
Reverse-voltage protection circuit
Current limiting can be enabled by adding sense resistors (not included)
Be the first to review “DRV8833 2 Channel DC Motor Driver Module Board 1.5A 3V-10V”
Most Viewed Products
-
Laser Levels Measuring Equipment 18F/5.5Meter Laser Level pro3 Aligner Horizon Vertical Line Measuring
-
PCA9685 16 Channel 12-bit PWM Servo Drive Shield Board DC Motor Driver Module I2C Controlled PWM Driver for Arduino
-
Liquid Level Sensor FS-IR02 (DFRobot)
-
Door Security Alarm System Infrared Motion Detector Wireless PIR Sensor Alarm with Remote Control
Reviews
There are no reviews yet.