DM556 Stepper Motor Digital Driver 24-50v DC 5.6A For CNC Machine
SKU: 1575- Description
- Reviews (0)
Description
Description:
Input power 24 ~ 50V DC power supply
Output current 1.0A ~ 5.6A, 8 adjustable, resolution 0.5A.
For 42/57/86 Stepper Motor
Low-speed zero vibration, and noise small
Applications; automatic packaging machines, dispenser, engraving machine and other automation equipment
Specification:
Drive Function Description
Signal interface
PUL + and PUL- are the positive and negative ends of the control pulse signal; DIR + and DIR- are the positive and negative ends of the directional signal; ENA + and ENA- are the positive and negative ends of the enable signal. 24V need to string 2K resistance
Motor interface
A + and A- are connected to the positive and negative terminals of the A-phase winding of the motor; B + and B- are connected to the positive and negative terminals of the B-phase winding of the motor. When A, B two-phase winding exchange, the direction of the motor can be reversed.
Power connector
DC power supply, the working voltage range is recommended for the 20-50VDC, power supply is greater than 100W, according to the actual use of open to see, the input is not more than DC40V is the right choice
Indicator light
Drive has two lights red and green. The green light is the power indicator light. When the driver is powered on, the green light is always on. The red light is the fault indicator light. When overvoltage or overcurrent fault occurs, the fault light is always on. After the fault is cleared, the red light is off. When a drive fails, it can only be cleared by powering it on and re-enabling it.
Installation instructions Dimensions of the drive: 118 × 75.5 × 34mm, installation pitch 112mmmm. Both horizontal and vertical installation, the proposed vertical installation. When installed, it should be close to the metal cabinet to facilitate the heat
Be the first to review “DM556 Stepper Motor Digital Driver 24-50v DC 5.6A For CNC Machine”
Most Viewed Products
-
You've just added this product to the cart:
ESP32-CAM-MB Micro USB Download Module
ESP32-CAM-MB Micro USB Download Module
-
You've just added this product to the cart:
1.5A Multi-function Mini Boost Module Step Up Board 5V 8V 9V 12V LED Indicator Diy Voltage Module
1.5A Multi-function Mini Boost Module Step Up Board 5V 8V 9V 12V LED Indicator Diy Voltage Module
-
You've just added this product to the cart:
DC 12V 0.3A 4N Pull Push Type Frame Solenoid Electromagnet Linear Motion 6.5mm Stroke JF-0520B
DC 12V 0.3A 4N Pull Push Type Frame Solenoid Electromagnet Linear Motion 6.5mm Stroke JF-0520B
-
0.91 inch OLED display module white/blue OLED 128X32
₨350.00
Reviews
There are no reviews yet.