4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board with Balance For Drill Motor 14.8V 16.8V
SKU: 1356- Description
- Reviews (0)
Description
4S 16.8V 40A lithium battery protection board
Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
Charging voltage: 16.8V – 18.1V
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
Continuous charge current (upper limit): 20A
Balanced version: suitable for starting current below 80A, power 220W below the drill.(with balance)
Note 1: The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!).
Note 2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.
Note 3: When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor’s positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.
Note 4: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.
Be the first to review “4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board with Balance For Drill Motor 14.8V 16.8V”
Most Viewed Products
-
Flysky Fs T6 2.4Ghz 6Ch Remote Control Transmitter Receiver
-
AC 220V PIR Detector Infrared Motion Sensor Switch With Adjustable Light Sensitivity And Time Delay
-
PAM8403 with Knob Dual Channel Mini Digital Stereo Amplifier Board
-
Mini Ups 5V DC 9V 12V Output for Routers Cellphone and Cctv Cameras Power Supply DC Online Portable (UPS only (without batteries))
Reviews
There are no reviews yet.