220V AC 50Hz Auto Infrared Sensor Switch PIR Microwave Radar Body Motion Sensor
SKU: 1449- Description
- Reviews (0)
Description
Parametric:
Voltage: AC 220V / 50HZ
Load power: Incandescent bulb: Le; 100W
Energy-saving light bulb: Le; 32W
Induction distance: 4-8M (adjustable)
Extension: 10S-70 (adjustable)
Lit: light control, not adjustable
Sensing angle: 180×360 & degrees;
Ambient temperature: -10℃~60℃
color: White
Cord length: 14 cm / 5.7″
Fixing hole size: 8 x 3mm/0.31″×0.12″ (L*W)
Center distance of fixing holes: 28mm / 1.1″
Scope of application: corridors, aisles, stairs
Load type: incandescent lamp, energy saving lamp, induction lamp, LED
Load type: incandescent lamp and Le; 100W, energy-saving lamp, round tube and Le; 32W, LED and Le; 15W
Feature:
1. According to the Doppler effect, the activity of the main body of the surrounding environment sensor.
2. When a person or object enters the active sensing range, the switch will automatically power on
It will automatically turn off the power until it is in a static state or when it leaves the United States.
3. With light control function, by default, at night or low light, normal (only work under daylight or environment
Please note that test cases with strong light cannot work normally. )
4. Partially penetrate non-metallic materials to induce. Such as glass, wood, plastic. At least 15cm can penetrate the wall to sense.
5. It is suitable for concealed installation and will not affect the appearance.
Please note:
1. On-site installation is forbidden, and load short circuit is strictly prohibited. (Don’t adjust the switch will cause damage at your own risk)
2. It is forbidden to use excessive load power.
3. When the wall thickness is less than 15cm, the wall switch can react.
4. In the induction zone, it does not affect the detection of objects or obstacles to stop movement, and there is no electromagnetic interference from other equipment.
5. Don’t oppose volatility as the basis for installation.
6. Initially turn on the power, the sensor will automatically switch the point light source. The sensing range of the object is guaranteed to flow freely. It is open for a period after the switch, and the light control automatically recovers. If there is activity around the object, the switch will stay forever.
7. Between the two switches, if there are no obstacles or obstacles that can easily penetrate materials (such as glass, wood, etc.), keep the distance between the switches more than 5 meters, and the two switches are too close to interfere with each other.
Be the first to review “220V AC 50Hz Auto Infrared Sensor Switch PIR Microwave Radar Body Motion Sensor”
Most Viewed Products
-
DIY 6×18650 Battery Case With Indicator Power Bank Shell Charger
-
Keweisi KWS-MX18L Multi-function USB Tester Charger Detector Digital Voltmeter Ammeter Voltage Meters
-
Saw Blade Connecting Rod 5mm Bushing Saw Blades Kit Motor Shaft Coupler Sleeve for Angle Grinder
-
DC 5V Micro USB Fan Governor Wind Speed Controller Air Volume Regulator Cooling Mute Multifunction Noise Reduction Switch PWM Module
Reviews
There are no reviews yet.